Webnotes:  Download

Strand7 Webnotes - Request Page

Preparing Webnote ST7- for download...

0.7 MB
ST7- Meshing a Pipe Elbow and Flange
This document outlines the procedure for creating a 90 pipe elbow using plate elements. This procedure could be adapted to model an elbow of any angle. It could also be adapted for use with beam or brick elements. The pipe geometry is shown on the right. A straight section of pipe mesh is provided and a 90 elbow is to be modelled. The flange is a 10 mm annulus on the end of the elbow.  The initial straight section of the pipe has been provided in the file ST7- StraightPipe.st7. ...
     About Us  |   Contact Us  |   Sitemap  |   中文(简体)网站
     Demo Software  |   Newsletter  |   Copyright  |   Disclaimer