Webnotes:  Download

Strand7 Webnotes - Request Page

Preparing Webnote ST7-R3.50.50.23 for download...

1.0 MB
ST7-R3.50.50.23 Using Cavity Layout and Attribute
The cavity attribute fills a closed cavity (i.e., volume) defined by plate and/or brick faces, with a fluid – e.g., the inside surface of a balloon, the inside surfaces of an IGU (Insulated Glass Unit), and so on. Two types of cavities are available and these are defined under LAYOUTS/Cavities:
  1. Ideal Gas Cavity.
  2. Constant Bulk Modulus Cavity.
     About Us  |   Contact Us  |   Sitemap  |   中文(简体)网站
     Copyright  |   Disclaimer